A New Path for Waste Textile Recovery: The Potential of SRF as an Alternative Fuel in Cement Kilns

Release time : 2026-11-20
Back

1. The Growing Environmental Challenge of Waste Textiles in China

China is the world's largest textile producer and consumer. As textile consumption continues to grow, so does the volume of discarded textiles. 

RDFranliaodequbie20250623 (3)

Waste textiles have become a major category of solid waste, creating increasing pressure on waste management and environmental protection.

 

According to industry estimates, China generates more than 20 million tonnes of waste textiles annually, with the commonly cited figure standing at around 22 million tonnes.

 

However, only approximately 5.15 million tonnes are recycled each year, representing an overall recycling rate of less than 30%. A large proportion of discarded textiles is still sent to landfill or disposed of through basic incineration, resulting in both resource waste and environmental concerns.

 

Waste textiles come from various sources, including discarded clothing from consumers, garment manufacturing offcuts, and industrial textile waste.

 

Their composition is becoming increasingly complex, particularly with the growing proportion of blended fabrics. This makes sorting more difficult and limits the ability of conventional fibre recycling technologies to process them on a large scale.

 

According to the development targets set by China's National Development and Reform Commission (NDRC), the textile recycling rate is expected to reach 30% by 2030, with recycled fibre production reaching 3 million tonnes. This also highlights the need for alternative recovery routes for waste textiles that cannot be effectively recycled into fibres.


feifangzhi3.jpg

 

2. Why Waste Textile Recovery Matters for the Environment

 

Recycling waste textiles is an important part of solid waste resource recovery and plays a significant role in environmental protection.

 

When large quantities of discarded textiles are sent directly to landfill, their slow degradation takes up valuable land resources and may release harmful substances into the soil and groundwater through landfill leachate. Improper incineration can also generate air pollutants.

 

Recovering and reusing waste textiles helps reduce the demand for virgin raw materials such as synthetic fibres and cotton. This, in turn, reduces the consumption of water, pesticides and other resources, while helping lower carbon emissions.

 

Studies have shown that recycling and reusing every kilogram of waste textiles can:

 

Avoid approximately 3.6 kg of CO₂ emissions.

Save around 6,000 litres of water.

Reduce the use of 0.3 kg of fertilisers.

Reduce the use of 0.2 kg of pesticides.

 

These figures highlight the environmental benefits of textile recycling in improving resource efficiency and reducing the environmental footprint of textile production.

 

However, improper treatment of waste textiles can also lead to secondary pollution. Some discarded textiles may contain hazardous substances, including heavy metals and dyes.

 

If these substances are not properly managed during treatment and recovery, they can create additional environmental risks and make recycling more technically challenging.


RDFranliaodequbie20250623 (3).jpg

 

3. Turning Waste Textiles into SRF: A New Route for Resource Recovery

 

Research in environmental science and pollution management has highlighted the challenges of handling discarded textiles.

 

Although recycling is possible, conventional recycling routes can have considerable environmental impacts, while the quality of the resulting recycled products is not always satisfactory.

 

Studies have shown that processed waste textiles can be converted into Solid Recovered Fuel (SRF) in accordance with ISO 21640:2021. Both natural and synthetic cellulosic fibres are considered suitable feedstocks for SRF production.

 

For waste textiles that are difficult to recycle into fibres, producing SRF offers another practical route for resource recovery, particularly for use as an alternative fuel in cement kilns.

 

Simple Sorting and Lower Processing Costs

 

Compared with mixed municipal solid waste, waste textiles generally contain fewer inert contaminants such as metals, glass and stones. This reduces the risk of equipment wear and blockages in downstream cement kiln systems.

 

The processing route is also relatively straightforward, involving sorting, shredding and, where required, size reduction or shaping. According to the project estimates, pre-treatment costs can be more than 40% lower than those for municipal solid waste RDF production.




Stable Calorific Value and Better Process Control

Waste textile-derived RDF typically has a calorific value of around 4,000–5,000 kcal/kg, with relatively consistent fuel properties compared with mixed-waste RDF.

 

This consistency helps cement plants manage fuel combustion more precisely, reduce fluctuations in kiln temperature and maintain stable clinker quality.

 

Significant Carbon Reduction Potential

Waste textile-derived RDF has a reported carbon reduction factor of approximately 0.8–1.0 tonnes of CO₂ per tonne of fuel, potentially higher than that of other RDF sources.

 

This is mainly due to the high proportion of organic materials in textiles and their potential to replace conventional fossil fuels, helping reduce emissions associated with fossil fuel combustion.

 

4. Harden's Waste Textile RDF Preparation System



4.jpg

 

To address the specific characteristics of waste textiles, Harden has developed a dedicated RDF preparation system for waste textile recovery.

 

Using modular and integrated equipment, the system combines multiple processing stages, including multi-stage shredding, air separation and magnetic separation.

 

Through this process, metals and other contaminants are removed from the waste textile stream before the material is finely shredded into RDF with a target particle size of 50 mm.

 

1. Heavy-Duty Primary Shredding: Breaking Down Bulky Materials

The twin-shaft shredder operates at low speed and high torque and is equipped with wear-resistant alloy steel cutters.

 

It is designed to effectively tear and shred bulky, tangled materials such as discarded textiles. Its robust cutter design offers longer service life and helps reduce maintenance requirements and downtime.


twoshaftshredder.jpg

 

2. Precise Separation: Removing Contaminants

Air separation and magnetic separation equipment work together to remove unwanted materials such as metals, stones and other inert contaminants.

 

With a reported impurity removal rate of over 95%, the system helps improve feedstock quality and maintain more stable combustion conditions in cement kilns, supporting reliable and efficient cement production.


windshifter.jpg

 

3. Fine Shredding: Producing Consistent Fuel Output

An intelligent feeding system ensures a steady material flow into the single-shaft shredder.

Combined with a specially designed screen, the system precisely controls the final particle size, producing uniform RDF with a particle size below 50 mm.

 

This consistent output helps improve fuel quality and can enhance calorific value consistency by up to 30%.

 

5. Higher-Quality RDF for More Efficient Cement Kiln Co-processing

 

The RDF/SRF produced by Harden's waste textile preparation system offers a higher calorific value and lower heat loss during kiln combustion.

 

The average calorific value can reach 4,500–5,000 kcal/kg, equivalent to approximately three-quarters of the calorific value of coal.

 

This makes waste textile-derived RDF a suitable alternative fuel for cement plants looking to increase their thermal substitution rate while reducing fuel costs and carbon emissions.


buliao.jpg

 

Converting waste textiles into SRF for cement kilns brings benefits beyond replacing coal and other fossil fuels. It also reduces the amount of waste sent to final disposal facilities, eases pressure on waste management infrastructure and promotes waste reduction and resource recovery.

 

With the right pre-treatment technology, waste textiles that would otherwise be difficult to recycle can become a valuable alternative fuel, supporting a more resource-efficient and low-carbon circular economy.